Noahlink Wireless 2 Hearing Aid Programmer - Digital Bluetooth Programming Machine

Technical Specifications: Operating range: 3 meters Bluetooth Version: BLE 5.3 Wireless (2.4 GHz): BT LE: 2402-2483 MHz Modulations: GFSK Number of channels: 40 Data rate: 1 Mbps / 2 Mbps Output power: +9 dBm EIRP Antenna: Internal antenna, Gain: 3dBi Operating temperature: 0°C to 55°C (32°F - 131°F) Storage temperature: -20°C to 60°C (-4°F - 140°F) Power connector: USB-C Power supply: Powered by the USB port of a PC Operating Voltage: 5 VDC Nstallation Guide To install Noahlink Wireless2 you can use the following procedure: 1.Before you connect Noahlink Wireless2 make sure that you have the approriate fitting software installed. The Noahlink Wireless2 driver is installed during fitting software installation. 2.After successful fitting software installation attach Noahlink Wireless2 to any USB port on the PC using the supplied USB cable.A 2-3 second solid green light indication will confirm that Noahlink Wireless2 is powered. 3.Performing a wireless fitting can sometimes be challenged due to number of factors related to equipment setup,and the physical layout of the fitting environment. Place Noahlink Wireless2 on the table with a clear line-ofsight to the hearing instruments which should be within a range of 10 feet (3 metres) Avoid placing the Noahlink Wireless2 in a USB hub with other USB devices (e.g.Bluetooth dongle) as this can decrease the efficiency of the Noahlink Wireless2. .When fitting hearing instruments inside a sound booth place the Noahlink Wireless2 inside or close to the booth. .it is recommended not to use USB cables between the Noahlink Wireless 2 and the PC exceeding a length of 10 feet (3 metres) 4.You are now ready to start fitting wireless hearing instruments.

• Fits: Compatible with all the new generation of Bluetooth hearing aids from Phonak, Oticon, ReSound, Bernafon, Unitron, Widex, Starkey and Sivantos.
• Features：The all new Noahlink Wireless 2 is a programming interface based on the Bluetooth Low Energy (BLE) standard. This means that Noahlink Wireless 2 can provide completely wireless programming between your computer and BLE enabled hearing instruments.
• Easy to use：Noahlink Wireless 2 connects via USB cable to your computer then communicates via low energy Bluetooth to the hearing aids. The hearing aid software on the computer is then able to connect and program the hearing aids accordingly.
• Updates ：Noahlink Wireless 2, the latest version of Noahlink Wireless, includes hardware component upgrades to keep up-to-date with technology changes. It is compatible with all devices that work with the original Noahlink Wireless. Noahlink Wireless 2 is an industry-standard programming interface based on the Bluetooth Low Energy (BLE) standard. This means that Noahlink Wireless 2 can provide completely wireless programming between your computer and BLE enabled hearing instruments.
• Intended Use: Noahlink Wireless 2 is intended to enable a hearing instrument fitter to wirelessly adjust the settings of wireless hearing instruments. The primary function of the Noahlink Wireless 2 programming interface is to transfer information signals between a PC installed with fitting software and wireless hearing instruments.